Table of Contents
Advertisement
Signal Processor
The processor requires an 'access code' to be entered before it allows you into
the configuration menus.
Use the UP and DOWN keys to change the displayed access code value to 417.
Press the ENTER key. The Main Configuration Menu will now be displayed.
See Fig. 21.
NOTE
A 'Time-out' feature returns you to the original screen if 60 seconds
elapse without a key being pressed. If this occurs, the access code must
be re-entered in order to regain access to the configuration menus.
Fig. 21 shows the Main Configuration Menu for a processor connected to four
thermometers and fitted with a serial communications card. Your system may
differ from this (dependant upon the number of channels/options fitted).
Page 28
Fig. 21 - Main configuration menu
User Guide
238021
LMG GS
Advertisement
Table of Contents
