Unpacking The Processor - Ametek Land LMG GS User Manual

Signal Processor

1.4 Unpacking the Processor

The package containing the processor will contain the following items:
Landmark Graphic GS Processor.
(i)
(ii) 7-way plug and cover (10-way plug and cover on GST Input Card)*,
(includes 2 screws and a clamp bar) for connection to
the thermometer.
(iii) 6-way plug* for alarm output connection.
(iv) 5-way plug* and cover (including 2 screws and a clamp bar) for
Retransmission output connection.
(v) 2-way plug* for command input connection.
(vi) 3 way appliance connector (rewireable) for power input cable.
(vii) One 2.5mm flat bladed screwdriver and one 2.5mm hexagonal
screwdriver to aid installation and set up.
(viii) User Guide. (A binder for your user documentation is supplied
with the thermometer.)
* One of these connectors is supplied for each thermometer channel fitted to
the processor.
If you have ordered any optional serial communications boards, these will be
supplied pre-fitted. Check that you have been supplied with all ordered items.
Page 6
User Guide
LMG GS