Wi-Fi Setup - Launch X-431 PAD VI User Manual

LAUNCH

3.4 Wi-Fi Setup

The tablet has dual built-in Wi-Fi communication modules. One is used to communicate with the tablet, and
the other allows the tablet to get online. Once you're online, you can register your tool, update diagnostic
software & APK, browse the Internet and send email on your network.
If the SmartLink C device is successfully activated, it will be automatically bound to the tablet. In this case it
is not necessary for the user to manually configure it again.
Note: Once WLAN is set as ON, the tablet will consume more power. While it keeps unused, please set it off to
save power. While WLAN is not in use, please turn it off to conserve battery power.
Connect to a WLAN Network
1. On the Home screen, tap Settings -> Network & in-
ternet -> Wi-Fi.
2. Slide the Wi-Fi switch to ON, the tablet starts search-
ing for available wireless LANs.
www.x431.com +86 755 8455 7891
3. Select the desired WLAN network from the list.
If the chosen network is open, you can con-
nect directly. A password may be required for
secured networks.
PAD VII User Manual
9