Launch X-431 PAD VI User Manual page 36

LAUNCH
• Value: Tap to display the parameters in texts.
Select Sample DS: Tap to select the sample DS file, the values you customized and saved in process of
data stream sampling will be imported into the Standard Range (See below) column for your comparison.
Note: Before executing this function, you have to sample the values of data stream items and save it as an
sample DS file.
Report: To save the current data as a diagnostic report. All diagnostic reports can be accessed from User
Info -> My Reports -> Health Report.
Record: Tap to start recording diagnostic data. Recorded live data can serve as valuable information to help
you in troubleshooting of vehicle problems. All diagnostic records can be replayed from User Info -> My
Reports -> Recorded Data.
Note: The saved file follows the naming rule: It begins with vehicle type, and then the product S/N and ends
with record starting time (To differentiate between files, please configure the accurate system time).
Help: Tap to view the help information.
Sample DS: This item enables you to customize the standard range of live data stream items and save it as
DS (Data Stream) sample file. Each time you run the data stream items, you can call out the corresponding
sample data to overwrite the current standard range.
Tap it to start recording the sample data, and the following screen will appear:
Note: Only the data stream items with measurement units will be recorded.
Tap to stop recording and navigate to the data revision screen.
30
PAD VII User Manual
www.x431.com +86 755 8455 7891