Connections; Preparation; Dlc Location - Launch X-431 PAD VI User Manual

LAUNCH
ADAS
Mall
Vehicle Coverage
Maintenance
User Info
Other Modules

4.3 Connections

4.3.1 Preparation

Normal testing conditions
• Turn on the vehicle power supply.
• Vehicle battery voltage range should be 9-18V or 11-36V and working voltage of the tablet is 5V.
• Throttle should be closed at its close position.
Select testing connectors/adaptor cables
If the tablet is testing vehicles equipped with universal OBD II (16 pin) diagnostic socket, please use the
included SmartLink C device. For vehicles with non-OBD II (non-16 pin) diagnostic socket, a non-16 pin
connector is required.

4.3.2 DLC Location

For Passenger Vehicles, the DLC (Data Link Connector or Diagnostic Link Connector) is the standardized
16-cavity connector where diagnostic code readers interface with the vehicle's on-board computer. The DLC
is usually located 12 inches from the center of the instrument panel (dash), under or around the driver's
side for most vehicles. If Data Link Connector is not located under dashboard, a label should be there telling
location. For some Asian and European vehicles, the DLC is located behind the ashtray and the ashtray
must be removed to access the connector. If the DLC cannot be found, refer to the vehicle's service manual
for the location.
14
This function enables users to perform ADAS (Advanced Driver Assistance
System) calibration operations. The ADAS calibration software is disabled
by default. Before using this function, users must activate the ADAS
function using the ADAS Activation Card.
Note: This function requires the diagnostic tool to work with the specific ADAS
calibration tool(calibration tools from other manufacturers will not be supported).
This module enables you to subscribe some extra software or service
functions that are not integrated in the diagnostic tool online.
To check the vehicle models supported on the tablet.
Abundant maintenance data are available, which helps repair professionals
diagnose and repair vehicles efficiently, accurately and profitably.
To manage VCI, diagnostic reports & records, change password, configure
Wi-Fi printer, data stream sample and logout / login etc.
Includes Toolbox (add-on modules, such as Oscilloscope, Ignition, Sensor,
Multimeter, Battery), Product Manual, FAQ and some system Apps etc.
PAD VII User Manual
www.x431.com +86 755 8455 7891