Adjust Brightness; Set Standby Time; Changing Language; Network Setting - Launch X-431 PRO3 User Manual

Hide thumbs Also See for X-431 PRO3:

Table of Contents

LAUNCH

3.7.4 Adjust brightness

Tips: Reducing the brightness of the screen is helpful to save the power of X-431

PRO3.

1. On the home screen, tap Settings -> Display -> Brightness level.

2. Drag the slider to adjust it.

If no activities are made within the defined standby period, the screen will be

locked automatically and the system enters sleep mode to save power.

1. On the home screen, tap Settings -> Display -> Sleep.

2. Choose the desired sleep time.

X-431 PRO3 supports multiple languages.

To change the language of the handset, please do the following:

1. On the home screen, tap Settings -> Language & Input -> Languages.

2. Tap "Add a language", and then choose the desired language from the list.

3. Tap and hold the desired language and drag it to the top of the screen and

then release it, the system will change into the target language.

Note: Once WLAN is set as ON, X-431 PRO3 will consume more power. While

WLAN keeps unused, please turn it off to conserve battery power.

X-431 PRO3 has a built-in Wi-Fi module that can be used to get online. Once

you're online, you can register your X-431 PRO3, update the diagnostic software

& APK, surf the Internet, get apps and send email on your network.

1. On the home screen, tap Settings -> WLAN.

2. Tap or slide the Wi-Fi switch to ON, X-431 PRO3 starts searching for all

available wireless LANs.

3. Choose the desired Wi-Fi access point / network,

 If the network you chose is open, you can connect directly;

 If the selected network is encrypted, you have to enter the right security

key (network password).

X-431 PRO3 User Manual

Table of Contents