Page 2
2.8. What is the difference between Regular, Tracking and Alarm points? 2.9. Where find version numbers? 3. Track Assistant software functionality 3.1. What Maps supports Track Assistant software? 3.2. How Teltonika support engineers can discover and fix the problem in my device configuration?
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 1. GPRS FUNCTIONALITY All GPRS configurations must be done with Track Assistant Monitoring Tool. 1.1. In GH120X configuration you can set 3 servers. How the device decide which server to send the data to? Automatic coordinates transfer and Alarm coordinates can be send to the Server1 only.
Page 4
• Server tel. no. +37065546952 • Before configuring GH120X, please contact Teltonika and send your device Serial Number (can be found written on sticker under battery cover). Then you must register in Web Application. Go to web page: http://212.59.9.226:7022/MD-web/registration/registration.jsf and fill in registration form. After device registration on Web Application is done – proceed with GH120X configuration.
Page 5
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 7/1 Authentication type – default value is None, but it depends on GSM Operator • 7/2 Access Point Name – check this option with your GSM Operator • 7/3 APN Username – check this option with your GSM Operator •...
Page 6
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 This is minimal GH configuration for Web Application. All other parameters can be as default. After configuration is done, put device in the place with a good sky visibility. Device will start looking for the GPS signal from the satellites.
Page 7
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 2.2. Can I see my coordinates on GPS Assistant software real-time when NMEA function is started? No. GPS Assistant application doesn’t support NMEA code parsing. 2.3. Is it possible makes voice call during Alarm? Voice call possibility during Alarm depends of chosen Alarm send method.
Page 8
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 Set Local echo settings • Confirm changes by pressing OK buttons • Now you are ready to communicate with Tracker through Hyper Terminal software. Type commands in to window and press Enter in the end. Results will be seen in the same window.
Page 9
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 #DEBUG=0 Stop DEBUG mode #DEBUG=1 Start DEBUG mode #GET:VER Show Firmware version #GET:IMEI Show GSM modules IMEI number #RST Restart device #DEFAULT Reset to Default (after command execution device will restart) #GET:MAIN Show MAIN configuration settings #GET:CFG1...
Page 10
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 By default in SMS Protocol, GMT time is set for transmission. In order to get Local Time – SMS Protocol settings must be changed. Instead of Time:<time> parameter, parameter Time_Local:<local_time> must be set. After these changes by SMS you’ll receive coordinates with Local Time.
Page 11
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 There are three types of points: Regular points • Track points • Alarm points • All three types of points are stored in different memory places and can be collected simultaneously.
Page 12
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 2.9. Where find version numbers? There are two version numbers which can be found by users: GH120X Firmware version number • GPS Assistant software version number • Firmware version Firmware version can be found with GPS Assistant software or through Terminal. In first situation start GPS Assistant software, connect GH120X to PC, press “Connect”...
Page 13
Handheld GPS/GSM Tracker GH120x FREQUENTLY ASKED QUESTIONS (FAQ) v1.5 rev.05 Another way – press button “Device information”. GPS Assistant software version Start GPS Assistant software and open menu Help About. 3. TRACK ASSISTANT SOFTWARE FUNCTIONALITY 3.1. What Maps supports Track Assistant software? There are few options to display coordinates on maps: use embedded MS Map Point maps •...
Page 14
3.2. How Teltonika support engineers can discover and fix the problem in my device configuration? Teltonika support engineers can find the problem in configuration and fix it, if you made your device configuration file and share it with them. Configuration file can be made by these simple steps: •...
Need help?
Do you have a question about the GH120 Series and is the answer not in the manual?
Questions and answers