Driver Replacement - U-Line H-1026 Manual

PHONE 1-800-295-5510
1. Loosen screw and nut with a 8mm spanner wrench and a 4mm Allen wrench.
2. Remove the magazine assembly.
3. Loosen the set screw with a 3mm Allen wrench to unlock the adjusting rod.
4. Remove the linkage mechanism and adjusting rod simultaneously from the body.
5. Loosen the pivot screws with flat screwdriver. Remove handle and linkage
mechanism.
6. Remove the Spring Pin with a hammer and 5 mm straight rod.
7. Loosen screws with a 3mm allen wrench. Take off the spring pin with a hammer
and 6 mm straight rod.
Back to Top
CHICAGO MINNEAPOLIS
•
FAX 1-800-295-5571

Driver Replacement

LOS ANGELES NYC/PHILA
• •
WEB uline.com
ATLANTA DALLAS
• •