Safety
4.15.2 Checking the Safety Devices
The lifting device has the following guards:
•
hand brake, arresting the carriage
•
support legs
•
transport locks
Check this safety devices:
•
at the beginning of each shift (when operating in shifts),
•
once a week (when operating continually).
Correct faults before operating the device. If faults occur during operation, switch the device off and correct the
faults before continuing work with the device.
Checking the hand brake::
•
Lock the hand brake
•
Push the carriage hard. It must not move.
Checking the support legs:
•
Check before any use, if all four legs have been unfolded and locked.
•
Check whether all supports have been wound down far enough to rest on the ground safely.
You can squeezes your hands when not handling the support legs properly upon swinging them in and out.
4.15.3 ELEKTRIC
●
Check all electric cables for connection.
●
Defective electrical parts may be exchanged only of
qualifiefd personnel in the dead condition.
●
The electric cables must be free of breaks and
abrasion. Take care that there are no outstanding
edges, where the hoses could kook in.
17 / 38