Connection Of Lifting Hose Cylinder And Suction Pad - probst JUMBOMOBIL JM-VARIO-150-B Operating Instructions Manual

Installation
6.5 Installation
The combination of the lifting hose unit, operating valve unit, hose cylinder extension and suction pad and coupling of the
suction hose to the connector of the lifting hose unit results in a device ready to operate. The connections must be made
only when the device is shut off.
6.6

Connection of lifting hose cylinder and suction pad

Open the clamps (2) on the lifting hose cylinder (1) . Apply the suction pad. (4). Insert the hooks into
the lags on the suction pad and close the clamps .
Put the lifting hose cylinder (1) onto the suction pad (2), screw it with four bolts (3) and lock it with
hex nuts (4).
1
3
4
2
1
4
3
2
25 / 38