Adjustments
Wind the support legs up with the crank (2) and fold in the support legs (1). Secure them with the locking bolts (3).
5.2
Fastening for transport
For transport you can tie the carriage firmly on all four corners. Use ropes of sufficient strength or chains and sling
these around the steel rods at the corners of the carriage.
•
If the jib is allowed to swing around, it may cause severe injury, fatal accidents are possible.
•
Transport the carriage only when the column has been wound down and retracted jib.
•
Lock the hinges of the jib and the joint in the middle with locking bolts.
3
4
1
2
21 / 38