Table of Contents
Advertisement
Available languages
Available languages
Installation
6.3
Preparing the JUMBOMOBIL JM for transport
The device can be transported on a car trailer (considering the dimensions and allowable total weight).
The transport of the device JUMBOMBIL JM with unsecured crane jib is strictly forbidden.
Danger of accident!
Therefore fold up the crane jib unconditionally.
Remove the lifting hose unit with operating valve unit (from crane jib)
The combination of the lifting hose assy, operator handle, lifting hose cylinder (SZV) and suction pad
and coupling of the suction hose to the connector of the lifting hose assy results in a device ready to
operate. The connections must be made only when the device is shut off.
6.4 Connection of operator handle and lifting hose cylinder - SZV
Put the operator handle (1) onto the hose ring of the lifting hose cylinder. It is fitted with a seal (3).
Put the hooks of the clamps (2) on the operator handle into the lags on the connecting disk of the lifting hose cylinder.
Then close the clamps and lock them with the pin against unintentional opening.
24 / 38
1
2
3
Advertisement
Chapters
Table of Contents
