Graco SaniForce 24V310 Instructions - Parts Manual page 10

Installation
2. Attach the articulating arm.
All models: models: Remove 4 nuts (308), washers (307)
All All models:
and the u-bolt (306) from the arm. Place the arm
on the elevator riser tube at the desired mounting
level for your pump. Reattach the u-bolt and
hand-tighten the nuts to secure the arm to the
tube.
Figure 1
3. Attach the pump bracket (401) and pump to the
articulating arm.
Figure 2 2:1 and Progressive Cavity Pump
Models:
10
Figure 3 5:1 Pump Models:
Figure 4 6:1 Pump Models:
333406D