Changing The Switching Thresholds - Roland R100 Series Manual

Start-up
6.7

Changing the switching thresholds

This function should only be performed, if the factory-set values for the thresholds (85% and 115%)
cannot be used.
Preparation:
Step 1
Fig. 15: Calling up the setup mode
Step 2
Fig. 16: Calling up a change
28 ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R100-Serie A100
for single sided sensors
Note! If this function is executed, the external Teach-In will also work with
the changed values.
A100: Place the sensor on the sheet.
I100: Place the sheet between the sensors.
R100structure.bmp
Press the key "change".
R100TChHandChange.bmp
Manual
Press the key "setup".
B0003306 / Rev. 1.0