Cincoze DC-1200 Series User Manual
  1. Manuals
  2. Brands
  3. Cincoze Manuals
  4. Desktop
  5. DC-1200 Series
  6. User manual

Cincoze DC-1200 Series User Manual

Rugged embedded computer
Hide thumbs Also See for DC-1200 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
DC-1200 Series
User Manual
Fanless Computing Solution
Intel® Pentium® N4200 Processor
Compact Fanless Embedded Computer
Version: V1.17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DC-1200 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cincoze DC-1200 Series

Summary of Contents for Cincoze DC-1200 Series

  • Page 1 DC-1200 Series User Manual Fanless Computing Solution Intel® Pentium® N4200 Processor Compact Fanless Embedded Computer Version: V1.17...

  • Page 2: Table Of Contents

    2.4 Definition of Connectors …...….……...……….....………………......24 Chapter 3 System Setup 3.1 Removing the Top Cover ……...……………………………….….…………………..29 3.2 Installing SO-DIMM Memory………………………..…………..…………….……………31 3.3 Installing Mini-PCIe Cards on Bottom Side……..……………………………..32 3.4 Installing a SATA Hard Drive…………………………………………………………………34 3.5 Installing a Half-Slim SSD….…………………………………………………………………35 DC-1200 Series | User Manual...
  • Page 3 4.7 Save & Exit …...……….….………………….…..….…..………………………....60 Chapter 5 Product Application (For DIO Only) 5.1 Digital I/O (DIO) application ………..………………………………………………………62 5.1.1 Digital I/O Programming Guide ……………………………………………………62 5.2 Digital I/O (DIO) Hardware Specification ……………………………………………………73 5.2.1 DIO Connector Definition ………………..……...…………….........74 DC-1200 Series | User Manual...
  • Page 4 6.10 Installing a CMI-DIO Module…….…………………………………………..……….……..93 6.11 Installing a CFM-IGN Module…….…………………………………………..……….……..95 6.12 Installing a CFM-PoE Module…….…..……………………………………..……….……..96 6.13 Installing a MEC-LAN Module…….…..………….…………………………..……………..98 6.14 Installing a MEC-COM Module…….…..………….…..……………………..……………103 6.15 Installing a Side Mount Bracket.….…..……………………………………..……….……107 6.16 Installing a VESA Mount Bracket .…..……………………………………..……….……..109 DC-1200 Series | User Manual...

  • Page 5: Revision

    2021/04/20 Copyright Notice © 2019 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified, or reproduced in any form or by any means for commercial use without the prior written permission of Cincoze Co., Ltd. All information and specification provided in this manual are for reference only and remain subject to change without prior notice.

  • Page 6: Product Warranty Statement

    Product Warranty Statement Warranty Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and workmanship for 2 years from the date of purchase by the original purchaser. During the warranty period, we shall, at our option, either repair or replace any product that proves to be defective under normal operation.

  • Page 7: Technical Support And Assistance

    Limitation of Liability Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original selling price of the product. The remedies provided herein are the customer’s sole and exclusive remedies.

  • Page 8: Conventions Used In This Manual

    11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage. 12. Never pour any liquid into an opening. This may cause fire or electrical shock. DC-1200 Series | User Manual...
  • Page 9 The equipment has obvious signs of breakage. ⚫ 14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. 15. Equipment intended only for use in a RESTRICTED ACCESS AREA. DC-1200 Series | User Manual...

  • Page 10: Package Contents

    Wall Mounting Kit DIN Rail Mounting Kit Note: Notify your sales representative if any of the above items are missing or damaged. Ordering Information Model No. Product Description Intel® Pentium® Processor N4200 Compact Size Fanless DC-1200-N42-R10 Computer DC-1200 Series | User Manual...

  • Page 11: Chapter 1 Product Introductions

    Chapter 1 Product Introductions DC-1200 Series | User Manual...

  • Page 12: Overview

    2.5" SATA drive bay and mSATA socket for extensive storage requirements. Furthermore, it is much easier to utilize Cincoze’ ready-to-use CMI& CFM modules for extension of digital I/O, serial ports, power ignition sensing, Power over Ethernet (PoE) even the third output of video for a variety of applications.

  • Page 13: Product Pictures

    ⚫ 2 x Full Size Mini-PCIe Socket, 2 x SIM Card Socket ⚫ Compact Size (185 x 131 x 56.5 mm) ⚫ Wide Operating Temperature -40°C to 70°C ⚫ E-mark (E13, No. 10R-0515075), LVD EN62368-1 DC-1200 Series | User Manual...

  • Page 14: Hardware Specification

    • Safety: LVD (EN62368-1) Other Function • In-Vehicle: E-Mark (E13, No. 10R-0515075) • Watchdog Timer: Software Programmable Supports 256 Levels System Reset • SuperCap Integrated for CMOS Battery Maintenance-free Operation • Supports Instant Reboot Technology (0.2 sec) DC-1200 Series | User Manual...

  • Page 15: System I/O

    Used to insert a SIM Card LAN Port 1 & 2 IGN Setting Switch Used to connect the system to a local area Used to set up IGN function network Clear CMOS Used to clear CMOS to reset BIOS DC-1200 Series | User Manual...

  • Page 16: Rear

    Used to plug a DC power input with terminal Used to plug a remote power on/off terminal block block COM Port Universal I/O Bracket COM 1 ~ COM 2 support RS232/422/485 Used for customized I/O output with optional serial device modules DC-1200 Series | User Manual...

  • Page 17: Mechanical Dimension

    1.7 Mechanical Dimension Unit: mm DC-1200 Series | User Manual...
  • Page 18 Chapter 2 Switches & Connectors DC-1200 Series | User Manual...

  • Page 19: Location Of Switches And Connectors

    2.1 Location of Switches and Connectors 2.1.1 Top View DC-1200 Series | User Manual...

  • Page 20: Bottom View

    2.1.2 Bottom View DC-1200 Series | User Manual...

  • Page 21: Switches And Connectors Definition

    SIM Card Sockets (apply with MINIPCIE1) CMI BTB 50-pin header connector BTB_FH1 (Support DVI-D/VGA/HDMI/DIO/COM Ports) CMI BTB 44-pin header connector BTB_FH2 (Support DIO/COM Ports) IGN_PH1 IGN Board to Board Connector POE_PH2 20-pin POE Board to Board Connector DC-1200 Series | User Manual...

  • Page 22: Definition Of Switches

    CLR_CMOS: Clear CMOS Switch Switch Definition 1-2 (Left) Clear CMOS 2-3 (Right) Normal Status (Default) POWER_LED1: Power Status LED Power Status LED Color POWER ON Green HDD_LED1: HDD Status LED HDD Status LED Color Yellow Read/Write DC-1200 Series | User Manual...
  • Page 23 SW1: Super CAP Switch and COM1~2 with Power Select Switch Function Setting via DIP Switch Location Function DIP1 DIP2 Enabled ON (Default) SUPER Disabled Location Function DIP3 DIP4 0V(RI) ON (Default) ON (Default) COM1 Location Function DIP5 DIP6 0V(RI) ON (Default) ON (Default) COM2 DC-1200 Series | User Manual...

  • Page 24: Definition Of Connectors

    11 REFCLK- 47 NA 12 UIM_CLK_A SMB_CLK 48 +1.5V REFCLK+ / PETn0 49 NA UIM_PWR_B 14 UIM_RESET_A SMB_DATA 50 GND 15 GND PETp0 51 NA 16 UIM_VPP_A 52 +3.3Vaux UIM_IC_DM / (UIM_CLK_B) 18 GND USB_D- DC-1200 Series | User Manual...
  • Page 25 11 REFCLK- 47 NA 12 NA SMB_CLK 48 +1.5V REFCLK+ PETn0 / SATA_TXN 49 NA 14 NA SMB_DATA 50 GND 15 GND PETp0 / SATA_TXP 51 NA 16 NA 52 +3.3Vaux 17 NA 18 GND USB_D- DC-1200 Series | User Manual...
  • Page 26 Link LED Status Definition Steady Green 1Gbps Network Link Steady Orange 100Mbps Network Link 10Mbps Network Link PWR_SW_LED: LED of Temperature Status Temperature LED Color Status 0℃ ~ 60℃ Colorless 60℃ ~ 87℃ Blue Over 87℃ DC-1200 Series | User Manual...
  • Page 27 COM1_1 / COM2_1: RS232 / RS422 / RS485 Connector Connector Type: 9-pin D-Sub RS422 / 485 RS485 RS232 Full Duplex Half Duplex Definition Definition Definition DATA - DATA + POWER1, POWER2: Power Connector Connector Type: 1x4 4-pin Wafer, 2.0mm pitch Definition +12V DC-1200 Series | User Manual...

  • Page 28: Chapter 3 System Setup

    Chapter 3 System Setup DC-1200 Series | User Manual...

  • Page 29: Removing The Top Cover

    3.1 Removing the Top Cover 1. Turn over the unit to have the bottom side face up, loosen the 4 screws of bottom cover and place them aside. 2. Remove the bottom cover from the chassis. DC-1200 Series | User Manual...
  • Page 30 3. Hold front and rear panel and lift up the body of unit vertically. 4. Turn over the body of the unit and place it gently. DC-1200 Series | User Manual...

  • Page 31: Installing So-Dimm Memory

    2. Tilt the SO-DIMM module at a 45-degree angle and insert it to SO-DIMM socket until the gold-pated connector of module contacted firmly with the socket. 45° 3. Press the modules down until it’s fixed firmly by the two locking latches on the sides. DC-1200 Series | User Manual...

  • Page 32: Installing Mini-Pcie Cards On Bottom Side

    Turn over the body of unit. Unscrew the 3 screws on HDD bracket and remove the bracket. Locate the Mini PCIe slots. Please note that the upside connector (MINIPCIE2) is shared mSATA/Mini-PCIe interface, and downside connector (MINIPCIE1) is Mini-PCIe interface which supports SIM Card to Link feature. DC-1200 Series | User Manual...
  • Page 33 Press down the module and fasten two screws to secure the module. If you have a Half-size Mini-PCIe card, make sure use extender to make it Full-size as shown below. DC-1200 Series | User Manual...

  • Page 34: Installing A Sata Hard Drive

    4 provided screws to assemble HDD and HDD bracket together. 3. Turn over the HDD bracket. Connect the HDD bracket to the SATA connector of the unit and fasten the 3 screws. DC-1200 Series | User Manual...

  • Page 35: Installing A Half-Slim Ssd

    3.5 Installing a Half-Slim SSD 1. Lift up the empty HDD bracket by unscrewing the 3 screws. 2. Fasten the 4 copper pillars. 3. Connect the Half Slim SSD to the SATA connector and fasten the 4 screws. DC-1200 Series | User Manual...

  • Page 36: Installing Antennas

    3.6 Installing Antennas 1. Remove the antenna rubber covers on rear panel. 2. Have antenna jack penetrate through the hole. 3. Put on washer and fasten the nut with antenna jack. DC-1200 Series | User Manual...
  • Page 37 4. Assemble the antenna and antenna jack together. 5. Attach the RF connector at another end of cable onto the module. DC-1200 Series | User Manual...

  • Page 38: Installing Cpu Heatsink Thermal Pad

    Thermal Pad has been removed! 3.8 Assembling the System 1. Hold the body of unit, and make sure the both sides of front and rear panels are in the chassis grooves and insert the body of unit into chassis. DC-1200 Series | User Manual...
  • Page 39 2. Level the grooves on the cover at front and rear panels. Put on the cover. 3. Fasten the 4 screws to fix the cover. DC-1200 Series | User Manual...

  • Page 40: Installing A Sim Card

    3.9 Installing a SIM Card 1. Loosen 2 screws on the front panel to remove the cover plate. 2. SIM card slots are at the front panel of the system. 3. Insert the SIM card. DC-1200 Series | User Manual...

  • Page 41: Wall Mount Brackets

    1. The mounting holes are at the bottom side of system. Use provided 4 screws to fasten the bracket with each side on system together. 2. Fasten the screws through the bracket mounting hole to mount system on the wall. DC-1200 Series | User Manual...

  • Page 42: Din-Rail Mount

    3.11 DIN-Rail Mount DC-1200 series offers DIN-Rail Mount that customer can install system on the DIN Rail. 1. The mounting holes are at the bottom side of system. Use provided 4 screws to fasten the bracket with each side on system together.

  • Page 43: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup DC-1200 Series | User Manual...

  • Page 44: Bios Introduction

    You can use arrow keys ( ↑↓ ) to highlight the field and press <Enter> to call up the sub-menu. Then you can use the control keys to enter values and move from field to field within a sub-menu. If you want to return to the main menu, just press the <Esc >. DC-1200 Series | User Manual...

  • Page 45: Main Setup

    Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. 4.2.1 System Date Set the date. Please use <Tab> to switch between date elements. 4.2.2 System Time Set the time. Please use <Tab> to switch between time elements. DC-1200 Series | User Manual...

  • Page 46: Advanced Setup

    ■ Enable ACPI Auto Configuration [Disabled] Enables or disables BIOS Advanced Configuration Power Interface® (ACPI) auto configuration. ■ Enable Hibernation [Enabled] Enables or disables system ability to hibernate state (OS/S4 state). This option may not be effective with some OS. DC-1200 Series | User Manual...

  • Page 47: F81866 Super Io Configuration

    Enables or disables Lock Legacy Resources. 4.3.2 F81866 Super IO Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal setting for the Super IO Device. ■ Serial Port 1~6 Configuration. DC-1200 Series | User Manual...

  • Page 48: Hardware Monitor

    Allows you to set watchdog timer’s value in the range of 0 to 255. 4.3.3 Hardware Monitor This screen displays the current status of all monitored hardware devices/components such as voltages, temperatures and all fans’ speeds. DC-1200 Series | User Manual...

  • Page 49: S5 Rtc Wake Settings

    [Dynamic Time]: Sets an increase minute(s) from current time to wake system from S5. 4.3.5 Serial Port Console Redirection ■ Console Redirection [Disabled] Allow users to enable or disable COM1, COM2, COM3, COM4, COM5, COM6 console redirection function. DC-1200 Series | User Manual...

  • Page 50: Cpu Configuration

    Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple virtual systems. 4.3.7 Network Stack Configuration DC-1200 Series | User Manual...

  • Page 51: Csm Configuration

    [UEFI]: Enables UEFI option ROM only. [Legacy]: Enables legacy option ROM only. ■ Video [UEFI] Controls the execution of UEFI and Legacy Video option ROM. [Do not launch]: Disables option ROM execution. [UEFI]: Enables UEFI option ROM only. DC-1200 Series | User Manual...

  • Page 52: Usb Configuration

    Enables or disables XHCI (USB3.0) hand-off function. Use this feature as a workaround for operating systems without XHCI hand-off support. ■ USB Mass Storage Driver Support [Enabled] Enables or disables USB mass storage driver support. DC-1200 Series | User Manual...

  • Page 53: Chipset Setup

    4.4 Chipset Setup This section allows you to configure chipset related settings according to user’s preference. 4.4.1 North Bridge This section provides information on the installed memory size. DC-1200 Series | User Manual...

  • Page 54: South Bridge

    Allows you to change Mini PCIE2 to [Mini PCIE] or [mSATA]. ■ PSE Enable Selection [Enabled] Enables or disables PSE (Power Sourcing Equipment). ■ LAN1 [Enabled] Enables or disables LAN1 Controller. ■ LAN2 [Enabled] Enables or disables LAN2 Controller. DC-1200 Series | User Manual...

  • Page 55: South Cluster Configuration

    ❑ PCIe Speed [Auto] Allows you to select PCI Express port speed. Configuration options: [Auto] [Gen1] [Gen2]. PCI Express Root Port 6 (MiniPcie) ❑ PCI Express Root Port 6 (MiniPcie) [Enabled] Enables or disables PCI Express Root Port. DC-1200 Series | User Manual...
  • Page 56 Configuration options: [Auto] [Gen1] [Gen2]. ■ SATA Devices SATA Port 0 ❑ Port 0 [Enabled] Enables or disables SATA Port 0. SATA Port 1 Port 1 [Enabled] ❑ Enables or disables SATA Port 1. ■ Miscellaneous Configuration DC-1200 Series | User Manual...
  • Page 57 ❑ Wake On Lan [Enabled] Enables or disables Wake On LAN (WOL) function. ❑ BIOS Lock [Disabled] Enables or disables BIOS the SC BIOS Lock enable feature. It is required to be enabled to ensure SMM protection of flash. DC-1200 Series | User Manual...

  • Page 58: Security Setup

    This section allows users to configure BIOS security settings. 4.5.1 Administrator Password Administrator Password controls access to the BIOS Setup utility. 4.5.2 User Password User Password controls access to the system at boot and to the BIOS Setup utility. DC-1200 Series | User Manual...

  • Page 59: Boot Setup

    Allows you to enable or disable Quiet Boot function. ■ Fast Boot Allows you to enable or disable Fast Boot function. If enabled, system boots with initialization of a minimal set of devices required to launch active boot option. DC-1200 Series | User Manual...

  • Page 60: Save & Exit

    ■ Save as User Defaults This item allows you to save the changes done so far as user defaults. ■ Restore User Defaults This item allows you to restore the user defaults to all the setup options. DC-1200 Series | User Manual...

  • Page 61: Chapter 5 Product Application (For Dio Only)

    Chapter 5 Product Application (For CMI-DIO03 only) DC-1200 Series | User Manual...

  • Page 62: Digital I/O (Dio) Application

    This section describes DIO application of the product. The content and application development are better understood and implemented by well experienced professionals or developers. 5.1.1 Digital I/O Programming Guide 5.1.1.1 Pins for Digital I/O BTB_FH2 BTB_FH1 DC-1200 Series | User Manual...
  • Page 63 Following is an example to enable configuration and to disable configuration by using debug. -o 4e 87 -o 4e 87 (enable configuration) -o 4e aa (disable configuration) 5.1.1.3 Relative Registers To program the F81866A configuration registers, see the following configuration procedures. DC-1200 Series | User Manual...
  • Page 64 DC-1200 Series | User Manual...
  • Page 65 DC-1200 Series | User Manual...
  • Page 66 <Output/Input Mode Selection> // Set GP80 to GP83 output Mode WriteByte(AddrPort, 0x88) // Select configuration register 88h WriteByte(DataPort, 0xXF)) // Set (bit 0~3) = 1 to select GP 80 ~83 as Output mode. <Output Value> DC-1200 Series | User Manual...
  • Page 67 // Set (bit 4~7) = 0 to select GP 74~77 as Input mode <input Value> WriteByte(AddrPort, 0x82) // Select configuration register 82h ReadByte(DataPort, Value) // Read bit 4~7(0xFx)= GP74~77 as High <Leave the Extended Function Mode> WriteByte(AddrPort, 0xAA) DC-1200 Series | User Manual...
  • Page 68 // Select logic device 06h <Input Mode Selection> // Set GP70 to GP77 input Mode WriteByte(AddrPort, 0x80) // Select configuration register 80h WriteByte(DataPort, 0x0X) // Set (bit 0~7) = 0 to select GP 70~77 as Input mode DC-1200 Series | User Manual...
  • Page 69 <Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter Extended mode <Select Logic Device> WriteByte(AddrPort, 0x07) WriteByte(dataPort, 0x06) // Select logic device 06h WriteByte(AddrPort, 0x60) // Select configuration register 60h (High Byte address) DC-1200 Series | User Manual...
  • Page 70 WriteByte(DataPort, (0x0A)) WriteByte(AddrPort, 0x61) // Select configuration register 61h (Low Byte address) WriteByte(DataPort, (0x00)) <Leave the Extended Function Mode> WriteByte(AddrPort, 0xAA) Cincoze default DIO Port base address is set to 0x0A00h DC-1200 Series | User Manual...
  • Page 71 = DI6 = DO6 (Base Base address address +3) +2) (0xA02) (0xA03) = DI7 = DO7 (Base Base address address +3) +2) (0xA02) (0xA03) = DI8 = DO8 (Base Base address address +3) +2) (0xA02) (0xA03) DC-1200 Series | User Manual...
  • Page 72 DIO I/O Port Address (Default Address 0xA00) 5.1.1.6 Pin Definition Data Bits Digital Input I/O Port Address 0xA03 Pin Definition Data Bits Digital Output I/O Port Address 0xA02 DC-1200 Series | User Manual...

  • Page 73: Digital I/O (Dio) Hardware Specification

    DO Signal have to pull up resistor to XCOM+ for external device, the resistance will affect the pull up current Signal High Level: Pull up resistor to XCOM+ Signal Low Level: = XCOM- Sink Current: 1A (Max) DC-1200 Series | User Manual...

  • Page 74: Dio Connector Definition

    Pin Definition Pin Definition XCOM+ (DC INPUT) XCOM- (GND) Pin1 5.2.1.2 BTB_FH2 DIO1: Digital Input / Output Connector Connector Type: Terminal Block 1X10 10-pin, 3.5mm pitch Pin Definition Pin Definition XCOM+ (DC INPUT) XCOM- (GND) Pin1 DC-1200 Series | User Manual...
  • Page 75 Connector Type: Terminal Block 1X10 10-pin, 3.5mm pitch Pin Definition Definition Definition Definition XCOM+ XCOM+ DO1 (DO5) (DC INPUT) (DC INPUT) DI1 (DI5) DO2 (DO6) DI2 (DI6) DO3 (DO7) DI3 (DI7) DO4 (DO8) XCOM- XCOM- DI4 (DI8) (GND) (GND) DC-1200 Series | User Manual...
  • Page 76 Reference Input Circuit Reference Output Circuit DC-1200 Series | User Manual...

  • Page 77: Chapter 6 Optional Modules And Accessories

    Chapter 6 Optional Modules and Accessories Pin Definitions and Settings DC-1200 Series | User Manual...

  • Page 78: Location Of The Connectors For Cmi Modules

    CMI-VGA01/UB1116 with 1x VGA Cutout for DC-1200 CMI Module with 1x HDMI Port for DC-1200, 1x Universal CMI-HD02/UB1108 Bracket with 1x HDMI Cutout for DC-1200 Locate the CMI Modules/ connectors on system motherboard as indicated. DC-1200 Series | User Manual...
  • Page 79 DC-1200, 1x Universal Bracket with 2x DB9 Cutout for DC-1200 CMI Module with 8x Optical Isolated DIO (4 in/4 out) for CMI-DIO03/UB1115 DC-1200, 1x Universal Bracket with DIO Cutout for DC-1200 Locate the CMI Modules/ connectors on system motherboard as indicated. DC-1200 Series | User Manual...

  • Page 80: Location Of The Connector For Cfm-Ign Module

    6.2 Location of the Connector for CFM-IGN Module Model No. Product Description CFM Module with Power Ignition Sensing Control Function, CFM-IGN02 Select 12V/24V Locate the CFM-IGN Module’s connector on system motherboard as indicated. DC-1200 Series | User Manual...

  • Page 81: Location Of The Connector For Cfm-Poe Module

    6.3 Location of the Connector for CFM-PoE Module Model No. Product Description CFM-PoE02 CFM Module with PoE Control Function, Individual Port 25.5W Locate the CFM-PoE Module’s connector on system motherboard as indicated. DC-1200 Series | User Manual...

  • Page 82: Cmi-Com Connector Definition And Settings

    SW1 on CMI-COM Module: COM3~4 with Power Select Switch Function Setting via DIP Switch Location Function DIP1 DIP2 0V(RI) ON (Default) ON (Default) SW1 on CMI-COM COM3_1 Module Location Function DIP3 DIP4 0V(RI) ON (Default) ON (Default) SW1 on CMI-COM COM4_1 Module DC-1200 Series | User Manual...
  • Page 83 SW1 on CMI-COM Module: COM5~6 with Power Select Switch Function Setting via DIP Switch Location Function DIP1 DIP2 0V(RI) ON (Default) ON (Default) SW1 on CMI-COM COM5_1 Module Location Function DIP3 DIP4 0V(RI) ON (Default) ON (Default) SW1 on CMI-COM COM6_1 Module DC-1200 Series | User Manual...

  • Page 84: Cfm-Ign Switches Definition And Settings

    (0 second) Default setting of Pin1 to Pin4 is OFF/ON/ON/ON. 24V_12V_1 on CFM-IGN Module: IGN Module Voltage Mode Setting Switch 12V / 24V Car Battery Switch Definition 24V Car Battery Input (Default) 12V Car Battery Input DC-1200 Series | User Manual...

  • Page 85: Installing A Cmi-Dvi Module

    1. Unscrew 2 screws to remove bracket#3 from rear panel. 2. Assemble the CMI-DVI bracket and CMI-DVI module together with 2 D-Sub jack screws. 3. Align two holes on the CMI-DVI bracket with the holes on the rear panel. DC-1200 Series | User Manual...
  • Page 86 (BTB_FH1) on the system’s mainboard. 5. Align the hole on CMI-DVI module with the screw hole on the system’s mainboard, and fasten a screw to fix it. 6. Fasten the 2 screws. DC-1200 Series | User Manual...

  • Page 87: Installing A Cmi-Vga Module

    1. Unscrew 2 screws to remove bracket#3 from rear panel. 2. Assemble the CMI-VGA bracket and CMI-DVI module together with 2 D-Sub jack screws. 3. Align two holes on the CMI-VGA bracket with the holes on the rear panel. DC-1200 Series | User Manual...
  • Page 88 (BTB_FH1) on the system’s mainboard. 5. Align the screw hole on CMI-VGA module with the screw hole on the system’s mainboard, and fasten a screw to fix it. 6. Fasten the 2 screws. DC-1200 Series | User Manual...

  • Page 89: Installing A Cmi-Hd Module

    2. Attach the CMI-HD bracket on the backside of system’s rear panel, and fasten it with two screws. 3. Align the hole on CMI-HD module with the screw hole on the system’s mainboard module, and insert vertically to the female connector (BTB_FH1) on the system’s mainboard. DC-1200 Series | User Manual...
  • Page 90 4. Fasten a screw to fix the CMI-HD module. 5. The installation is complete. DC-1200 Series | User Manual...

  • Page 91: Installing A Cmi-Com Module

    1. Unscrew 2 screws to remove bracket#2 or bracket#3 from rear panel. 2. Assemble the CMI-COM bracket and CMI-COM module together with 4 D-Sub jack screws 3. Align two holes on the CMI-COM bracket with the holes on the rear panel. DC-1200 Series | User Manual...
  • Page 92 5. Make sure the hole on CMI-COM module is aligned with the screw hole on the system’s mainboard, and fasten a screw to fix it. 6. Fasten 2 screws for each CMI-COM bracket as marked. COM6 COM3 COM4 COM5 DC-1200 Series | User Manual...

  • Page 93: Installing A Cmi-Dio Module

    2. Attach the CMI-DIO bracket on the backside of system’s rear panel, and fasten it with two screws. 3. Push the connector pins on CMI-DIO module until the pins can be inserted completely to the female connector (BTB_FH2 or BTB_FH1) on the system’s mainboard. DC-1200 Series | User Manual...
  • Page 94 4. Make sure the hole on CMI-DIO module is aligned with the screw hole on the system’s mainboard, and fasten a screw to fix it. DC-1200 Series | User Manual...

  • Page 95: Installing A Cfm-Ign Module

    1. Locate the IGN connector on system motherboard as indicated in page 75, and insert the male connector of CFM-IGN module to the female connector on system’s mainboard. 2. Fasten a screw to fix the CFM-IGN Module. DC-1200 Series | User Manual...

  • Page 96: Installing A Cfm-Poe Module

    Before putting on the thermal block (in the next step), please make sure the protective film on the Thermal Pad has been removed! 3. Paste the heatsink onto the CFM-PoE module carefully and fasten 2 screws to fix it. DC-1200 Series | User Manual...
  • Page 97 Before assembling the system’s chassis cover, please make sure the protective films on the Thermal Pads have been removed! 5. When the system is power on, please note that the POE LED will light on if the POE module is properly installed. DC-1200 Series | User Manual...

  • Page 98: Installing A Mec-Lan Module

    Mini-PCIe Module with 2x LAN Ports, 1x Universal Bracket with UB1129 2x RJ45 Cutout for DC-1200 Rear Bezel 6.13.1 Rear Panel 1. Locate the Mini PCIe slots. 2. Unscrew the 2 screws to remove bracket#3 from the rear panel. DC-1200 Series | User Manual...
  • Page 99 4. Insert the Mini-PCIe card of MEC-LAN module at 45-degree angle and insert it to the either slot until the gold-pated connector of module contacted firmly with the slot. 45° 5. Fasten the two screws. DC-1200 Series | User Manual...
  • Page 100 6. Attach the LAN board of MEC-LAN module onto bracket from the back side. Fasten the two screws. Front Panel 6.13.2 1. Locate the Mini PCIe slots. DC-1200 Series | User Manual...
  • Page 101 3. Attach the MEC-LAN bracket on the back side of system’s front panel, and fasten it with two screws. 4. Insert the Mini-PCIe card of MEC-LAN module at 45-degree angle and insert it to the either slot until the gold-pated connector of module contacted firmly with the slot. 45° DC-1200 Series | User Manual...
  • Page 102 5. Fasten the two screws. 6. Attach the LAN board of MEC-LAN module onto bracket from the back side. Fasten the two screws. DC-1200 Series | User Manual...

  • Page 103: Installing A Mec-Com Module

    6.14 Installing a MEC-COM Module Model No. Product Description Mini-PCIe Module with 2x COM Ports,1x Universal Bracket with MEC-COM-M212-TD B9/UB1103 2x DB9 Cutout for DC-1200 1. Locate the connectors on MEC-COM module and the accompanied flat ribbon cable. DC-1200 Series | User Manual...
  • Page 104 2. Align the protrusion and notch on the two connectors. Insert the female connector on the flat ribbon cable to the connector on MEC-COM module. 3. Locate the Mini PCIe slots. 4. Unscrew the 2 screws to remove bracket#1 from the front panel. DC-1200 Series | User Manual...
  • Page 105 6. Insert the Mini-PCIe card of MEC-COM module at 45-degree angle and insert it to the either slot until the gold-pated connector of module contacted firmly with the slot. 45° 7. Fasten the two screws. DC-1200 Series | User Manual...
  • Page 106 8. Penetrate the COM ports through the bracket from the back side. 9. Fasten the two hex screws. DC-1200 Series | User Manual...

  • Page 107: Installing A Side Mount Bracket

    6.15 Installing a Side Mount Bracket Model No. Product Description Side Mount Kit for DC-1200 Series, with KMRH-K175 for SIDE03 DIN-Rail option DC-1200 offers Side Mount that customer can install the system onto the right or left side of wall to create effectiveness of space.
  • Page 108 2. Place the side mount bracket on the bottom of system as shown in the picture below, and fasten the rest of 4 screws to fix the side mount bracket with system together. 3. It is achievable to mount system on the wall by fastening the screws through the bracket mounting hole. DC-1200 Series | User Manual...

  • Page 109: Installing A Vesa Mount Bracket

    1. Provided below is the base of the system unit with screw holes specified to be mounted for VESA stand. Blue circles represent the use for VESA 75 mm. Red circles represent the use for VESA 100mm. DC-1200 Series | User Manual...
  • Page 110 2. Provided below is mounted with VESA stand. 3. Provided below is completion of mounting with VESA stand. DC-1200 Series | User Manual...
  • Page 111 © 2020 Cincoze Co., Ltd. All rights reserved. The Cincoze logo is a registered trademark of Cincoze Co., Ltd. All other logos appearing in this catalog are the intellectual property of the respective company, product, or organization associated with the logo.

This manual is also suitable for:

Dc-1200-n42-r10

Table of Contents