Display Elements - Feig Electronic OBID i-scan ID ISC.M02 Installation Manual

®
OBID i-scan HF

3.3 Display elements

The ID ISC.M02 Reader Module has a green LED (V1) and a red LED (V2) which are used as dis-
play elements (Fig. 5).
The functions of both LEDs can be configured using software protocol. It is also possible to control
both LEDs directly using an additional software protocol.
Table 3.3-1 shows the standard setting for V1 and V2.
LED
V1
V2
Table 6
FEIG ELECTRONIC GmbH
V1 V2
X1
Fig. 5
: Position of LEDs V1 and V2
Color Standard setting
• Flashes 4x after a reset.
Green
• Flashes continuously at a frequency of 2 Hz.
• Flashes 4x after a reset.
• Comes on for 1 second after successful
Red
communication with a transponder.
: Standard setting for the LEDs
Installation
X4
J1
Page 14 of 27
ID ISC.M02
M20301-4e-ID-B.doc