Installing The Vtx-3 In Your Pool - Kreepy krauly VTX-3 Owner's Manual

5
Attach the Bumper Strap
STEP
Insert the bent end of the bumper
strap through the deflector (which will
prevent it from spinning) and into
the back of the main body (near the
bottom of the cleaner). Insert the
other end into the swivel
head assembly.

Installing the VTX-3 in your pool

1
Prepare your pool
STEP
If your pool is clean, balanced and algae-free, you're ready to
get started.
a.
b.
c.
d.
e.
f.
6
SOC34095 VTX-3 instructions_VERSION 1_Art3.indd 6
First, clean the skimmer and pump basket.
Check the water level.
Brush down the sides of your pool.
Next, make sure the return jets are facing downwards.
Then, backwash or clean your cartridge filter.
Now turn off the pump.
bent section down
23/10/2015 4:27 pm
S S