Kreepy krauly VTX-3 Owner's Manual page 10

3
Build the Ultra Flex Hose
STEP
Start with the male-male hose and twist on a female length.
Keep going until the hose is long enough to reach from
your skimmer box to the far corner of your pool plus around
1.5 metres extra – this will optimise the coverage of your VTX-3.
male
TIP:
make them easier to connect to each other.
4
Attach the Hose Weight
STEP
Pull apart the second and third hose sections, slide on the weight
then reconnect the hose. The weight should sit approximately
2m from the end of the hose that connects to the VTX-3.
TIP:
weight at 4m – pull apart the fourth and fifth
hose sections, slide on the weight then reconnect.
8
SOC34095 VTX-3 instructions_VERSION 1_Art3.indd 8
Wetting the hose ends in your pool will
For pools deeper than 2m, use an additional
male female
2m
S
S
23/10/2015 4:27 pm