Advertisement
You notice bubbles at return
to pool outlets:
• Check if the hose is damaged
by lifting it near the surface and
listening for a hissing sound.
Replace damaged section with a
new section.
• Reprime the pump.
• Check the Smart-Skim or Auto
Skim valve isn't jammed.
• Make sure the pool water level is
high enough.
• Check the Smart-Skim or Auto
Skim valve isn't sitting above the
waterline. If it is, fit an anti-vortex
washer on the valve.
NOTE:
For more detailed troubleshooting advice please don't
hesitate to contact your helpful local dealer, or check our online
resources for tips and other information: www.kreepykrauly.com.au
16
SOC34095 VTX-3 instructions_VERSION 1_Art3.indd 16
VTX-3 is always coming
to the surface of the pool,
possibly drawing in air:
• Check that the Smart-Skim
or Auto Skim valve is installed
correctly (see page 7).
• Check that there are no large
leaves blocking the Smart-Skim
valve and creating excess vacuum.
• Check the hose weights are fitted
correctly and readjust if necessary.
23/10/2015 4:27 pm
Advertisement
