Advertisement
Fine-tuning your VTX-3
Depending on your pool's shape and surface, you may need to make some
small tweaks to optimise the performance of your VTX-3.
How to achieve the right incline
VTX-3 works best when the main body sits at a 45° incline to the pool surface.
If your cleaner is lifting (greater than 45°), move the hose weight towards
the swivel head assembly. To test if it is sitting correctly turn off the
pump, tow the VTX-3 into 1.2 metres of water and observe how it sits
when it settles to the bottom. Adjust the hose weight further if needed.
more than 45°
If your cleaner is sitting lower than 45° , move the hose weight away from
the swivel head assembly. If it still won't sit correctly, call your pool shop or
our Customer Service Centre for advice.
less than 45°
11
SOC34095 VTX-3 instructions_VERSION 1_Art3.indd 11
23/10/2015 4:27 pm
Advertisement
