Advertisement
VTX-3 only travels around
the water line:
• Check the hose is not coiled. If it is
coiled, try to straighten the hose out.
VTX-3 travels around the water
line in only one direction:
• Check that the main body and
swivel head are not out of
alignment. Adjust accordingly.
The VTX-3 only climbs part
way up the wall:
• Check the sole isn't worn and
needs replacing.
VTX-3 becomes stuck on the
main drain:
• Fit a main drain cover over the grille.
SOC34095 VTX-3 instructions_VERSION 1_Art3.indd 15
VTX-3 keeps wedging itself
on the steps:
• Shorten the pool hose slightly so
the VTX-3 can't reach the steps and
clean the missed area manually.
• Check seal and sole for damage.
VTX-3 doesn't sit at 45° and
has difficulties attaching to
the pool floor:
• Adjust hose weights closer to or
further away from the machine until
the seal is flat on the pool floor.
• Make sure the bumper strap
is fitted.
• Check for damage to the machine
and missing floats.
15
23/10/2015 4:27 pm
Advertisement
