Kreepy krauly VTX3 Installation And Operation Manual

PROUDLY DESIGNED
AND MADE IN AUSTRALIA
BALANCE SYSTEM
Kreepy Krauly works most effectively when inclined at 45° with the seal flat
on the pool surface. To test the balance adjustment switch off the pool pump,
tow Kreepy Krauly into approx. 1.2m of water and allow it to settle to bottom.
The seal must be sitting flat on the pool floor and the drive tubes should be
at 45° to the floor. If Kreepy Krauly is lifting (i.e. at an angle of more than
45°), move the second hose weight towards the swivel. Adjust until the seal
sits flat on the pool surface. Allow Kreepy Krauly to settle back to the bottom
after each adjustment to get a fair evaluation. Turn your pump on and
Kreepy Krauly will move around your pool cleaning it automatically.
Note: If you have difficulty balancing Kreepy Krauly, remove the first hose
weight or consult your local Kreepy Krauly service centre by phone for advice.
If Kreepy Krauly is inclined at an angle greater than
45°, move the second hose weight towards the
swivel head assembly.
Adjusting the angle and balance of Kreepy Krauly
45°
AUTHORISED KREEPY KRAULY ACCESSORIES
Cross Bar
When prevention of Kreepy Krauly
climbing pool walls is required.
Main Drain Cover
Used to replace the main drain grille
to ensure smooth travel of Kreepy
Krauly over the main drain. Simple
installation. NO screws required.
Expanding Plug
Used for blocking some types of
skimmer box pool drain inlets.
OPTIONAL EXTRA
TWIN VALVE AUTOSKIM
automatic "AutoSkim" Skimmer valve and
vacuum plate combination ensures full
surface skimming of all floating leaves
and debris. "AutoSkim" is available as an
optional extra with the VTX3.
AutoSkim INSTALLATION
A Kreepy Krauly AutoSkim Combination Vac/
Plate Skim Valve is recommended for superior
performance and continued maximum
surface skimming. Pools with high flow pump
and filter systems are recommended to use
a Kreepy Krauly AutoSkim combination Vac/
Plate Skim Valve.
ATTENTION POOL BLANKET OWNERS
When a Pool Blanket is in use, carefully monitor your chlorine or salt
water chlorinator settings to avoid over chlorinating your pool which
may damage your Kreepy Krauly and void your Warranty.
The Pool Blanket prevents chlorine evaporating reducing the need
to add more chlorine. If you have a salt water chlorinator remember
to lower the amount of chlorine produced when the pool blanket is
in use. If you have any questions please call our Customer Service
department on 13 80 90 or your local pool Clark Rubber Store.
When servicing your Kreepy Krauly, look for
this seal to ensure that the part you are buying
is a certified genuine Kreepy Krauly part.
Roller Bumper Strap
Used in pools with rough surfaces
where standard bumper strap may
wear excessively.
Vacuum Plate Clamp
Used to hold down the vacuum plate
when the pool pump is off.
Wheel Deflector
Prevents Kreepy Krauly from
becoming caught in tight corners or
between steps and the pool wall.
The unique