Advertisement
Looking after your VTX-3
•
IMPORTANT If you are giving the water a shock treatment with chlorine or
other chemicals, remove your VTX-3 from the pool for at least 24 hours. If the
chemicals are too strong for people to swim in, they're too strong for the VTX-3.
•
Do not use petrol or solvents to clean your VTX-3 as they will damage it.
If needed, use detergent and water.
•
Periodically check the suction seal, scrubbing sole and bumper for wear
and tear. If they need replacing, see your pool shop.
TIPS TO PROTECT YOUR HOSE:
•
Never stretch or lift the hose while it is full of water
•
Never hang your hose from hooks
•
Always store your hose loosely coiled (minimum 1m diameter)
on a flat surface or, ideally, disassemble and store straight
– particularly if storing long term. This will prevent the hose
from kinking and ensure your VTX-3 can move freely
when you return it to the pool.
18
SOC34095 VTX-3 instructions_VERSION 1_Art3.indd 18
23/10/2015 4:27 pm
Advertisement
