Table of Contents
Advertisement
ioLogik E1261W-T
System Management
Accessibility IP List
You can control network access to the ioLogik E1261W-T from the Accessibility IP List page by enabling
access only from specific IP addresses. When the Enable the accessibility IP list checkbox is enabled, a
host's IP address must be provided and enabled in the list in order to gain access to the ioLogik E1261W-T.
Enable access for a range of IP addresses by specifying the IP address and netmask, as follows:
To allow access for a specific IP address
Enter the IP address in the IP Address field and 255.255.255.255 in the Netmask field.
To allow access for hosts on a specific subnet
Enter 0 as the last digit in both the IP Address field and Netmask field (e.g., 192.168.1.0 and
255.255.255.0).
To allow unrestricted access
Deselect the Enable the accessible IP list option.
Refer to the following table for additional configuration examples.
Allowed Hosts
Any host
192.168.1.120
192.168.1.1 to 192.168.1.254
192.168.0.1 to 192.168.255.254
192.168.1.1 to 192.168.1.126
192.168.1.129 to 192.168.1.254
IP Address/Netmask
Disable
192.168.1.120 / 255.255.255.255
192.168.1.0 / 255.255.255.0
192.168.0.0 / 255.255.0.0
192.168.1.0 / 255.255.255.128
192.168.1.128 / 255.255.255.128
3-14
Using the Web Console
Advertisement
Table of Contents
