Roller Bearing Grease - Lenze L−force GST Operating Instructions Manual

7.2.2

Roller bearing grease

The closed roller bearings on motors and gearboxes from Lenze are greased at the factory.
The following greases can be used for regreasing:
Gearbox roller bearing
GST, GFL, GKS, GKR, GKL
Gearbox roller bearing
GSS
Motor roller bearing
The following lubricant quantities are required:
For fast−running bearings (motor and drive end of gearbox): fill approx. one−third of
ƒ
the hollow space between rolling bodies with grease.
For slow−running bearings (in gearbox and driven side of gearbox): fill approx.
ƒ
two−thirds of the hollow space between roller bearings with grease.
BA 12.0023−EN 6.0
Ambient temperature
−30...+80°C
−30...+80°C
−15...+60°C
−30 °C ... +70 °C
−40 °C ... +80 °C
l
Maintenance
Maintenance operations
Roller bearing grease
Manufacturer
Klüber Petamo GHY 133 N
Klüber Petamo GHY 133 N
Klüber Klüberplex BE 11−462
Lubcon Thermoplex 2TML
Klüber Asonic GHY 72
7
Type
55