4
Mechanical installation
Mounting
Mounting the hoseproof hollow shaft cover
4.4.9
Mounting the hoseproof hollow shaft cover
for size 09, 11 and 14
Fig. 11
1. Screw the three reducing bushes (3) into the flange with a screwdriver so they are
flush and staggered by 120°.
2. Fit seal (4) between flange and protective cap (1).
3. Fasten the protective cap (1) over the reducing bushes (3) on the flange using three
cheese head screws (2).
34
3x120°
1
Protection cover
2
Cheese head screw
3
Thread reducing sleeve
4
Seal
l
4
1
3
2
BA 12.0023−EN 6.0