Mounting The Shrink Disc With A Rotating Cover - Lenze L−force GST Operating Instructions Manual

Dismounting
1. Undo axial gearbox locking in the hollow shaft.
2. Remove/extract the gearbox from the motor shaft using an appropriate auxiliary
tool (Fig. 6).
Fig. 6
Æ d
H7
25
30
35
40
45
50
55
60
70
80
100
Tab. 6
4.4.7

Mounting the shrink disc with a rotating cover

(
Stop!
Do not dismantle new shrink disc.
Never tighten clamping screws before the machine shaft is pushed in.
Otherwise the hollow shaft may be deformed plastically. Protect the shrink
disc against contact while in operation by appropriate measures (e.g. cover).
Degrease hollow shaft bore and machine shaft!
BA 12.0023−EN 6.0
Mounting the shrink disc with a rotating cover
Dismantling of gearboxes with hollow shaft using the auxiliary tool, not for GKR
Auxiliary tool (recommended dimensions)
Dimensions in [mm]
l
Mechanical installation
Mounting
c
8
10
12
16
16
20
20
20
24
4
K12.0611
c
9
3
3
4
5
5
6
8
29