Mounting The Fixed Cover - Lenze L−force GST Operating Instructions Manual

4.4.8

Mounting the fixed cover

for size 09, 11 and 14
)
Note!
This cover is supplied loose on delivery!
Fig. 10
1. Screw the three reducing bushes (3) into the flange with a screwdriver so they are
flush and staggered by 120°.
2. Fasten the protective cap (1) over the reducing bushes (3) on the flange using three
cheese head screws (2).
BA 12.0023−EN 6.0
3x120°
1 Protection cover
2 Cheese head screw
3 Thread reducing sleeve
l
Mechanical installation
Mounting
Mounting the fixed cover
x
x
4
1
3
2
33