Hardware Installation - Moxa Technologies NPort 5600-8-DTL Series Quick Installation Manual

Name Color
InUse off
(P1 to
P8)
TX/RX green (Tx)
(P1 to
orange (Rx)
P8)
off

Hardware Installation

STEP 1: After removing the NPort 5600-8-DTL from the box, place it on
a desktop or other horizontal surface. Connect the 12-48 VDC power
adaptor to the NPort 5600-8-DTL's power input when using an AC
power source, or connect the NPort 5600-8-DTL's terminal block
directly to a DC power source.
STEP 2: Use an Ethernet cable to connect the NPort 5600-8-DTL to a
network hub or switch. You can also connect directly to your computer's
Ethernet port, which is convenient for initial configuration or testing.
STEP 3: Connect the NPort 5600-8-DTL's serial port to a serial device.
Wall or Cabinet Mounting
The NPort 5600-8-DTL comes with two metal attachment plates to
allow installation on a wall or the inside of a cabinet. First, attach the
brackets to the back of the NPort with screws. Next, mount the unit on
a wall or cabinet with screws. Screws should be less than 6.0 mm in
head diameter, and less than 3.5 mm in shaft diameter.
DIN-Rail Mounting
DIN-Rail attachments can be purchased separately to attach the
product to a DIN-Rail. The DIN-Rail attachments should be oriented
with the metal springs on top.
Standard Attachment
Function
Serial port is not currently opened by server
side software.
Serial device is transmitting data.
Serial device is receiving data.
No data is flowing to or from the serial port.
- 4 -
DK-35A Attachment