• NPort 5650-8-DT-J: 8 ports, RS-232/422/485, RJ45 • NPort 5650I-8-DT: 8 ports, RS-232/422/485, DB9, optical isolation Package Checklist The NPort 5600-8-DT package should contain the following items: • NPort 5600-8-DT 8-port serial device server • Power cord and adapter •...
Hardware Introduction Top and Rear View Front View (NPort 5610-8-DT, 5650-8-DT, 5650I-8-DT) Front View (NPort 5610-8-DT-J, 5650-8-DT-J) Reset Button The reset button is used to load the factory defaults. Use a pointed object to hold the reset button down for five seconds. You may release the reset button when the Ready LED stops blinking.
No data is flowing to or from the serial port. Hardware Installation STEP 1: After removing the NPort 5600-8-DT from the box, place it on a desktop or other horizontal surface. Connect the 12-48 VDC power adaptor to the NPort 5600-8-DT’s power input when using an AC power source, or connect the NPort 5600-8-DT’s terminal block directly to a...
DIN Rail Mounting DIN-rail attachments can be purchased separately to attach the product to a DIN-rail. The DIN-rail attachments should be oriented with the metal springs on top. Standard Attachment DK-35A Attachment NOTE The operating temperature of the power adapter in the box is from 0 to 40°C.
panel. The wizard will prompt you to configure the IP address, SSID, and security mode. For other settings, use the factory defaults or modify the settings for your application. For software installation, download the relative utilities from Moxa's website: https://www.moxa.com/support/support_home.aspx?isSearchShow=1 •...
Page 8
RS-422 Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire) Data+, Data-, GND RS-485 (4-wire) Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection 15KV ESD for all signals RS-485 Data Direction ADDC™ (Automatic Data Direction Control) Serial Communication Parameters Parity None, Even, Odd, Space, Mark Data Bits 5, 6, 7, 8 Stop Bit(s)