Page 2
Overview The NPort 5600-8-DTL series includes the following models: NPort 5610-8-DTL: 8 ports, RS-232, 0 to 60°C • • NPort 5650-8-DTL: 8 ports, RS-232/422/485, 0 to 60°C NPort 5650I-8-DTL: 8 ports, RS-232/422/485, 0 to 60°C, 2KV • optical isolation. NPort 5610-8-DTL-T: 8 ports, RS-232, -40 to 75°C •...
Page 3
Hardware Introduction Top and Rear Views Front View Reset Button Use a pointed object to hold the reset button down for at least five seconds to load the factory defaults. Release the reset button when the Ready LED stops blinking. LED Indicators The LED indicators on the top panel are used to display the status as follows:...
Page 4
Name Color Function InUse Serial port is not currently opened by server (P1 to side software. TX/RX green (Tx) Serial device is transmitting data. (P1 to orange (Rx) Serial device is receiving data. No data is flowing to or from the serial port. Hardware Installation STEP 1: After removing the NPort 5600-8-DTL from the box, place it on a desktop or other horizontal surface.
Page 5
NOTE The operating temperature of the power adapter in the box is from 0 to 40°C. If your application is out of this range, please use a power adapter supplied by UL Listed External Power Supply (The power output meets SELV and LPS and rated 12 - 48 VDC, minimum current 0.73 A).
Need help?
Do you have a question about the NPort 5600-8-DTL Series and is the answer not in the manual?
Questions and answers