Clock Oscillator Y2; Em Board Socket Connectors P1 And P2 - Motorola M68EML08EY User Manual

3.8 Clock oscillator Y2

3.9 EM Board Socket Connectors P1 and P2

User's Manual
MOTOROLA
When you select the EM option on jumper W4 (jumper on pins 1-2), the clock
signal generated by Y2 is supplied to the external inputs of the MCU. You can
replace Y2 with another compatible clock oscillator to provide a different clock
frequency (see schematic page 6).
Connectors P1 and P2 connect the EML08EY to the platform board.
Figure 3-7 and Table 3-7 give pin assignments and signal descriptions for
connector P1. Figure 3-8 and Table 3-8 give pin assignments and signal
descriptions for connector P2.
Support Information
M68EML08EY Emulation Module - Version 1.0
Support Information
Clock oscillator Y2
27