Table of Contents
Advertisement
General Information
1.2.2 Motorola Modular Evaluation System (MMEVS0508)
M68EML08EY Emulation Module - Version 1.0
12
•
two logic clip cable assemblies — twisted-pair cables that connect the
station module to your target system, a test fixture, an oscillator, or any
other circuitry useful for evaluation or analysis. One end of each cable
assembly has a molded connector, which fits into station-module pod A
or pod B. Leads at the other end of each cable terminate in female probe
tips. Ball clips come with the cable assemblies and may be attached to
the female probe tips.
•
a 9-lead RS-232 serial cable — the cable that connects the MMDS to
the host computer RS-232 port.
•
system software — development software, on CD-ROM.
•
MMDS0508 documentation — an MMDS operations manual
(MMDS0508OM/D) and the appropriate EM user's manual.
You select the MMDS baud rate: 1200, 2400, 4800, 9600, 19200, 38400, or
57600.
Substituting a different EM enables your MMDS to emulate target systems
based on different MCUs or MCU families. (Your Motorola representative can
explain all the EMs available.)
An MMEVS is an economical tool for designing, debugging, and evaluating
target systems. A complete MMEVS consists of:
•
a platform board (PFB) — the bottom board, which supports the
emulator module. The platform board has connectors for power and the
the terminal or host computer.
•
an emulator module (EM) — such as the EML08EY, a separately
purchased printed circuit board that enables system functionality for a
specific set of MCUs. The EM fits onto the PFB. The EM has connectors
for the target cable and for cables to a logic analyzer.
•
a 9-to-25-pin adapter — a molded assembly that lets you connect the
9-pin cable to a 25-pin serial port.
•
a 9-lead RS-232 serial cable — the cable that connects the station
module to the host computer RS-232 port.
•
system software — development software, on CD-ROM.
General Information
User's Manual
MOTOROLA
Advertisement
Table of Contents
