Figure 2-10. J15 Clock Line Configuration; Table 2-2. Vmemodule Headers/Switches - Motorola MVME712C Installation And Use Manual

Preparing and Installing the Hardware
Serial port 4 clock configuration select header -- J15
2
2-12
Serial port 4 can be configured to use clock signals by the TRXC4 and
RTXC4 signal lines. Header J15 configurations of the clock lines are
shown in Figure 2-10. The module is shipped without clock lines
connected (no jumpers).
Part of the configuration must be done with headers or switches on the
processor VMEmodule, as listed in the following table.

Table 2-2. VMEmodule headers/switches

Processor Module
MVME147
MVME162
MVME167
MVME177
For more information see
with your processor VMEmodule.
TRXC4 TO PORT 4 PIN 15
TRXC4 TO PORT 4 PIN 17
TRXC4 TO PORT 4 PIN 24

Figure 2-10. J15 clock line configuration

Header Processor Module
J8, J9 MVME1600
J12 MVME2600
J9, J10 MVME2700
J9, J10 MVME3600
MVME4600
Figure 2-9 and the installation guide furnished
J15
1 3 5 7 9 11
RTXC4 TO PORT 4 PIN 24
RTXC4 TO PORT 4 PIN 17
RTXC4 TO PORT 4 PIN 15
Computer Group Literature Center Web Site
Header
J8, J15, J16
J16, J17, J20
J16, J17, J19
J9, J10, J16
J9, J10, J16
cb210 9212A