LG niagara4 MultiSITE Edge 10 User Manual page 67

Following is an example of the system shell menu.
Figure 39: System shell menu (serial shell or Telnet access)
To select a menu option, type the associated number (1 to 9) or "L" for logout, then press Enter. For example,
type 2 (Update Network Settings) to recover IP access, or to set the IP settings of a new MS-E10 device.
•
type 6 (Change System Passphrase) to change the system passphrase of the unit. You might do this if swapping in a
•
microSD card from a previously configured unit, in order to change the passphrase of the unit to match the passphrase
that is already stored on the SD card.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
67