LG niagara4 MultiSITE Edge 10 User Manual page 63

The figure with numbered call-outs, shown here, indicates the position of USB port and pushbutton
switches.
Figure 38: Position of USB port and pushbutton switches
1 STAT LED
2 BEAT LED
3 DEBUG
4 FACTORY RESET
5 RESET
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Status LED, illuminated while controller is powered.
Heartbeat LED, normally 5Hz, 50% duty cycle. Fast blink during boot process.
Micro-A USB port for serial debug communications
Push-button switch to initiate a return to factory default settings
Unlabeled push-button switch (located in the recessed cavity) to initiate physical reset of the device.
MS- E10 User Guide
63