LG niagara4 MultiSITE Edge 10 User Manual page 43

Reviewing/adjusting PlatformServices properties for the device
Prerequisites:
A running station in the MS-E10 device, and that station opened in Workbench.
Step 1 In the Nav tree, double-click Services and then PlatformServices.
Its "Platform Service Container Plugin" displays in the view pane.
Some properties are read-only status types, similar to many seen in the Platform Administration view. Other configuration
properties can be edited. A group of 3 config properties allow adjustment of the time, date, and time zone settings for the host
MS-E10 device (alternately accessible using a platform connection to the MS-E10 device). Access to these properties is useful if
the installation requires all setup access using a browser only.
Step 2 As needed, review other platform service configuration properties shown in the following.
Note:
You should leave the properties listed in the following table at default values unless otherwise directed by Systems Engineering.
Step 3 Click Save to write any configuration change to the host MS-E10 device platform.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
43