About This Guide; Product Documentation - LG niagara4 MultiSITE Edge 10 User Manual

ABOUT THIS GUIDE

This topic contains important information about the purpose, content, context, and intended audience for this document.

Product Documentation

This document is part of the Niagara technical documentation library. Released versions of Niagara software include a complete
collection of technical information that is provided in both online help and PDF format. The information in this document is written
primarily for Systems Integrators. In order to make the most of the information in this book, readers should have some training or
previous experience with Niagara 4 software, as well as experience working with JACE network controllers.
Document Content
This document describes the initial Niagara 4 software installation and configuration for a QNX-based controller, using
Workbench (versions Niagara 4.7 and later).
For physical mounting and wiring details for the device, refer to its specific hardware installation document.
This document does not cover station configuration or Niagara 4 components. For more information on these topics, please refer
to online help and various other Niagara 4 software documents.
Related documentation
Additional information on Niagara system, devices and protocols is available in the following documents.
MS-E10 Mounting and Wiring Guide
•
JACE-8000 Install and Startup Guide
•
Niagara Provisioning Guide
•
Niagara Platform Guide
•
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
6