Starting The Commissioning Wizard - LG niagara4 MultiSITE Edge 10 User Manual

Before starting the commissioning process, note the following points:
Throughout the wizard's dialogs, use the buttons Back and Next, as needed, to retrace (or skip) steps. Also, the
•
Cancel button exits the wizard after your confirmation—no operations are performed as a result.
Before committing to the final sequence of steps, the wizard provides a summary for you to review.
•

Starting the Commissioning Wizard

The Commissioning Wizard runs a series of steps to guide you through all the needed information.
Prerequisites:
In Workbench on your PC, open a platform connection to the MS-E10 device.
Step 1: In the Nav tree, right-click Platform →Commissioning Wizard.
The dialog box Commissioning for "<IP address>" displays with default selections for a new MS-E10 device).
Figure 9: Commissioning dialog box
By default, all steps are preselected except lexicon installation. Steps are executed in the order listed.
Note:
In Niagara 4.6 and later, if the Workbench FIPS Option to Show FIPS Options is set to "true" certain FIPS options become visible
in this window. If selected, FIPS-strength password requirements are enforced.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
22