Chapter 3: Run The Commissioning Wizard - LG niagara4 MultiSITE Edge 10 User Manual

CHAPTER 3: RUN THE
COMMISSIONING WIZARD
Topics covered in this chapter
Starting the Commissioning Wizard
•
Installing or updating licenses
•
Installing or updating licenses from files
•
Setting the enabled runtime profiles
•
Specifying a station database to install
•
Selecting modules to install or upgrade
•
Install/upgrade core software
•
TCP/IP configuration
•
Configuring system passphrase
•
Remove default platform user account
•
Configuring additional platform daemon users
•
Reviewing and finishing the Commissioning Wizard
•
As shown below, the Commissioning Wizard is a right-click option on any connected MS-E10 platform in the Nav tree. You can
also launch the wizard from the Platform Administration view.
Figure 8: Commissioning Wizard as right-click platform option
Use this wizard when installing a new MS-E10 device, as it provides a "checklist" method to perform essential (and often "one
time") platform tasks. Also use this wizard whenever you upgrade the core Niagara 4 software in the MS-E10 device, at some
future time. See the Niagara Platform Guide for more details.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
21