Installing Or Updating Licenses From Files - LG niagara4 MultiSITE Edge 10 User Manual

At least one license file specific to any MS-E10 device is stored on the licensing server. Providing you have Internet connectivity,
this is the recommended method to install or update a license.
For license files validated against the Tridium certificate, installation can be automated from Workbench. All such purchased
licenses (including MS-E10 device, Supervisor, or Workstation-only) are stored and available to Workbench through the licensing
server.
If your PC currently has Internet connectivity while running a platform connection to any Niagara host, Workbench provides an
install option to get and install the licenses for the host from the license server. When selected, Workbench silently searches the
license server for a license with a matching "Host ID" of the target platform. When found, it selects the license(s) and advances
to the next wizard step. For more details, refer to the section "About the licensing server" in the Niagara Platform Guide.
Step 1 Select "Install licenses from the license server."
Step 2 Workbench silently searches the licensing server, locates the license(s), and the wizard advances to the next step.
Note:
If the "license server" option shown above does not appear, Workbench has not detected Internet connectivity, and so cannot
contact the licensing server. In this case, you can either:
If you already have a license for this MS-E10 device in your "local license database," select the last option shown to
•
install from your "Workbench license database." (This option will be missing if your local license database does not
include a license for this MS-E10 device.) Workbench locates the license, and the wizard advances to the next step.
If you have the MS-E10 device license file(s), use the procedure, "Installing or updating licenses from files". If
•
necessary, you can install license(s) later, either from your local license database or from license files.

Installing or updating licenses from files

During the license install step, the wizard checks to see if a Tridium certificate is installed. This certificate is required by any
Niagara host, to verify the license file. If other licenses are installed, additional certificates may also be required.
Figure 11: License certificate
Step 1: Select Install these certificates and click Next to advance to the next step.
Step 2: At the License step, select "Install one or more licenses from files".
Step 3: Click the Next button.
The "Choose license files to install" step appears.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
24