LG niagara4 MultiSITE Edge 10 User Manual page 48

Advanced Options — A dialog to enable or disable the following advanced platform options
•
SFTP / SSH Enabled — A dialog to enable/disable SFTP and SSH access to the device, or change the
–
default port number that these protocols use/share.
Daemon Debug Enabled — Temporarily enable the browser based daemon debugging tools. This is
–
automatically turned off the next time the system boots.
USB Backup Enabled — Enable or disable the USB Backup port on the device's enclosure.
–
Change Output Settings — A dialog to change the log level of different processes that can appear in
•
the platform daemon output
View Daemon Debug — A window in which you can observe debug messages from platform daemon
•
processes in real time. Also includes ability to pause or load.
• View System Log — A window for viewing system log(s) for the platform.
Configure Runtime Profiles — A dialog to change the types of runtime profiles for software modules
•
installed on the device (initially performed in Commissioning Wizard).
Configure NRE Memory — A dialog to configure the memory allocation sizes of this platform's Niagara
•
Runtime Environment.
Backup — Make a complete backup of all configuration on the connected host platform, including all
•
station files, plus other Niagara configuration (typically unnecessary for any MS-E10 device just started
up).
Commissioning — Another way to re-launch the Commissioning Wizard, as previously used in the initial
•
commissioning of the device.
Reboot — A method to reboot the MS-E10 platform, which restarts all software including the OS and
•
JVM, then the platform daemon, then if so configured in the Application Director (Station Director), the
installed station. If you click this, a confirmation dialog appears.
If you reboot, your platform connection is lost, and it is typically a few minutes until you can reconnect
to this MS-E10 device.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
48