Hisun HS294-2 Owner's/Operator's Manual page 59

the shock absorber assembly to a HSUN
dealer for any service.
The spring preload, rebound damping and
compression damping forces of the front and
rear shock absorber assemblies can be
adjusted to suit the operating conditions.
Spring Preload Setting(Front)
Minimum(soft): 332mm(13.07 in)
Maximum(hard): 442mm(17.40in)
Spring travel setting(Rear)
Minimum(soft): 402mm(15.83in)
Maximum(hard): 502mm(19.76 in)
NOTE:
Hitch coupling device
12-59
1. Rebound damping force adjusting screw
Compression damping force
Turn the compression damping force adjusting
screw (use 3.0 Allen wrench) in direction ⓐ to
increase the compression damping force and
thereby harden the damping, and in direction
ⓑ to decrease the compression damping force
and thereby soften the damping.