Checking Engine Start System; Checking Wheel Bolt Torque - Hisun HS294-2 Owner's/Operator's Manual

① Range gear shift lever pivot (spray type grease )

■ Checking engine start system

CAUTION
TO avoid personal injury
⚫
Do not allow anyone near the vehicle
while testing.
⚫
If the vehicle does not pass the test, do
not operate the vehicle.
◆ Preparation before testing
Place all control levers in the "NEUTRAL"
1.
position.
2. Set the parking brake and stop the engine.
◆ Test gear shift range lever safety switch
Sit on the operator's seat.
1.
Shift the range gear shift lever to: "L", "H",
2.
"N" or REVERSE position.
Hitch coupling device
① Range gear shift lever

■ Checking wheel bolt torque

To avoid personal injury
⚫
⚫
⚫
Check wheel bolts regularly especially when
12-70
CAUTION
Never operate vehicle with a loose
wheel bolts.
Any time these bolts are loosened they
should be retightened to the specified
torque.
Check all bolts frequently and keep
them tight.
new if they are loose tighten them as
follows: