Hitch Coupling Device - Hisun HS294-2 Owner's/Operator's Manual

Basic information
Hitch coupling device is the device linking
tractor and trailer.
Coupling ball are parts that are subject to
type approval and that connect vehicles,
and are therefore subject to the highest
safety requirements.
They may only be operated with the
compliant Coupling head that have been
approved. Coupling ball are produced in
accordance with the Regulation （EU）
2015/208.
Adapt your driving to the road conditions
when towing a trailer. Towing a trailer
affects the handling of a vehicle. Always
follow the vehicle manufacturer's operating
instructions.
Specifications of the vehicle manufacturer
regarding trailer and torque load set the
standards for vehicle operation.
Values specified for the tow bar must not
be exceeded.
T : Total weight of the vehicle in t
R : Total weight of the trailer in t
g : acceleration due to gravity, 9.81 m/s
Always observe the standard fixing points
specified by the vehicle manufacturer.
Always observe national guidelines
concerning official approval of extensions.
These installation and operating
instructions have to be kept with the vehicle
documents.

Hitch coupling device

Coupling ball is prohibited and will result in
the cancellation of the type approval.
Hitch coupling device a:
2
The ste
body：
1.As shown in Picture 2, pull ② out. When
① can turn upward, put ③ on the hitch ball.
Return ①, loose ②.
12-101
①hitch rod ②Pin ③block
ps to link hitch rod and vehicle