Accelerator Pedal - Hisun HS294-2 Owner's/Operator's Manual

3. Select proper gear and engine speed
depending on the types of job.
4. Before exiting vehicle, shift the gear shift
lever to the "NEUTRAL" position and set
parking brake.
① Range gear shift lever
(L) LOW Range
(H) HIGH Range
(N) NEUTRAL" POSITION
(R) "REVEREE"
NOTE:
⚫
When range gear shift lever is hard to
engage, do not force the lever. Set the
parking brake,
accelerator pedal and release it to neutral
position, then shift the lever.
When the lever is hard to disengage, do
not force the lever.
Depress the brake pedal fully, then shift the
lever. Damage may occur with wrong shifting.
Hitch coupling device
slightly depress the
correctly loaded to avoid skidding
and loss of steering control. Reduce
the speed and engage front wheel
drive.
⚫
Accident may occur if the vehicle is
suddenly braked, such as heavy
towed loads shifting forward causing
loss of control.
⚫
The braking
different between two and four wheel
drive. Be aware of the differences and
operate carefully.
5. Unlock the parking brake and start
slowly.
To release the parking brake, depress the
brake pedal. Make sure that indicator in the
instrument panel goes off.
① Parking brake

■ Accelerator Pedal

The accelerator pedal is used to increase the
engine and vehicle speed. Push down on it
for higher speed.
12-45
characteristics are