Mount The Pump - VERDER VERDERAIR VA-EH50 Operation

Installation
Mount the the Pump Pump
Mount Mount the Pump
For pumps that are provided with a stand, the pump
must be mounted to the stand before securing the
pump to the mounting surface. Ensure that the pump
is securely mounted to the stand.
The pump may be very heavy (see
Technical Data, page
weights). If the pump must be moved, follow the
Pressure Relief Procedure, page
people lift the pump by grasping the outlet manifold
securely, or use appropriate lifting equipment.
Never have one person move or lift the pump.
1. All pump models must be securely mounted to
the floor. Ensure that the mounting surface is
level and can support the weight of the pump,
lines, and accessories, as well as the stress
caused during operation.
14
44, for specific
21, and have two
2. VA-EH VA-EH pumps: VA-EH pumps: Secure the pump with screws pumps:
through the mounting feet and through the
mounting bracket or compressor box on the gear
box. See Dimensions, page 35
mounting holes for your pump.
VA-E2H pumps: pumps: Ensure that the pump is
VA-E2H VA-E2H pumps:
securely mounted to the stand. Secure the
pump with screws through the mounting bracket.
Mount the pump and stand assembly on a level
surface and secure the assembly to the mounting
surface. See Dimensions for VA-E2H52 Pumps
, Dimensions for VA-E2H53 Flapper Pumps
, or Dimensions for VA-E2H54 Flapper Pumps
as appropriate for dimensions of mounting holes
for your pump.
NOTE: NOTE: NOTE: For ease of operation and service, mount
the pump so the air valve cover, air inlet, and
fluid inlet and outlet ports are easily accessible.
NOTICE NOTICE NOTICE
To prevent pump damage, use all fasteners
in all mounting holes.
VA-EH pump fasteners shown
for dimensions of
859.0769