Warranty Terms; Warranty Claims Procedures - SaMASZ KDT 180 Operator's Manual

WARNING!
A warranty card without the required information or with corrected or illegible
information – is invalid.

11. WARRANTY TERMS

11.1. Warranty claims procedures

1. The manufacturer guarantees its products against faults in materials or production.
2. The warranty period is for two years from the date of sale to the purchaser, stated above.
3. Any repair which is subject to warranty should be carried out by an authorised SaMASZ dealer. Upon
completion of the repair the dealer must submit a warranty claim within 14 days.
4. Warranty claims regarding replacing of the product or repayment are considered within 14 days by
the manufacturer.
5. The following cases are not covered by warranty:
a) wearing parts: mowing discs, sliding skids, intersecting axis gears and parts inside the
gearboxes, bushings and sliding elements, joints, knife mounting, cutting knives,
V-belts, silide bushings Pcw, V-belt gears, drive belt, conditioner's tines and rollers, roller
cinditioner's rubbers, bearings, safety curtains, conveyor's belts, swath guide's rubbers,
connective elements, etc.
These repairs may be done only at purchaserer's cost.
b) use for any other purpose than those described in the operator's manual,
c) operation on stoney fields and its results: damage of tine conditioner's shaft, discs, bending
of cutterbar (stone with its diameter of 140 mm will not move between the discs and
conditioner's shaft),
d) running into any obstacle,
e) too fast lowering of the cutterbar to the ground,
f) transport and accidental damage,
g) breaking, damage of tine conditioner's shaft.
6. The Purchaser bears the costs of technical estimation - when the manufacturer finds that a claimed
product is free of defects and a technical report will confirm that.
7. The manufacturer has the right to cancel a warranty in the following cases:
a) interference of the interior of the mower, changes of its mechanical design or intentional
damages, bending parts of the mower and so on.
b) operating with only 1 knife on the disc or without disc cover plates.
c) damage caused by accidents, running into obstacles or other events, for which the warrantor
is not responsible,
d) use of knives, knife mounting and mountings other than originally delivered by SaMASZ,
e) regulating safety breakaway device spring (Fig. 14) not in accordance with the instructions
described in this operator's manual,
f) lack of needed records in the warranty card or filling in the warranty card independently,
g) use of the mower not in accordance with operator's manual or for incorrect purpose.
46
KDT DISC MOWER OPERATOR'S MANUAL