Timberwolf TW 280TVGTR Instruction Manual page 72

DECALS
DECAL
P*691
C192-0112
C192-0105
C190-0176
DESCRIPTION
616
Warning.
Hot exhaust
617
Warning.
High velocity discharge -
keep clear
670
Personal Protective
Equipment required.
See page 5.
1661
Read the instruction manual
for greasing and
maintenance information.
1662
The instruction manual with
this machine contains
important operating,
maintenance and health and
safety information. Failure
to follow the information
contained in the instruction
manual may lead to death or
serious injury.
1399
Push safety bar to stop.
Do not pull here.
Fuel Here.
Risk of fire. Allow engine to
cool for 1 minute before
refuelling.
Use diesel fuel only.
When the engine stop
button is pressed it must
be pulled out again and
the ignition switch turned
off to reset the machine
before attempting to
restart.
P3611
Danger.
Rotating blades.
Keep hands and feet out.
29 / 73
DECAL
C192-0102
01.03.2019
TW 280TVGTR
DESCRIPTION
4099
Danger.
Rotating blades.
Keep hands and feet out.
2800
Reverse feed
2801
Forward feed
Warning. Do not engage starter
19517
motor for more than 20 seconds.
Allow one minute before
attempting to start. Investigate
reasons for failure to start.
Excessive cranking will result in
starter motor failure. This will
not be covered under warranty.
Lifting eye is designed to lift the
2949
machine's weight only. Do not
use hoist hook directly on lifting
eye. Use correctly rated safety
shackle only through lifting eye.
Lifting eye to be inspected every
6 months or before each use.
Always visually inspect lifting eye
prior to each use. Do not use
lifting eye if damaged.
3022
Clean under blades before
refitting or turning. Failure to do
so may result in blade(s) coming
loose and damage being caused
to the rotor housing.
18393
New drive belts need re-
tensioning.
When new belts are fitted check
tension every 2-3 hours & adjust
until tension remains constant.
P1812
Torque blade bolts to 125 lbs ft
(170 Nm).
Danger.
Do not climb into the feed funnel.
Rev: 2.0