Table of Contents
Advertisement
Pre Installation Information
System Options
Speaker shelves
Additional patchrows
DL Connector Panel
TFT Monitor arm
PSU redundancy
Script Tray
Page 12
A flat shelf that fits over the top trim of the console. Can be retrofitted to existing
consoles without modification.
1U connectorised 2 x 48-jack patchrows. Can be specified independently from patchbays.
Mating D25–D25 cables are not supplied. DL socket to 3-off 25-way D-type-male adaptor
leads are available at extra cost.
The internal patchbay option is wired out as standard to a panel fitted with D25 female
connectors. This panel can be replaced with one fitted with DL96 female connectors to
simplify the interface to an installation where DL connectors are already in use.
A vertical adjustable arm fitted to the rear of the console to which one or two LCD
monitors may be mounted. Suitable for monitors equipped with the VESA MIS-D 100
mounting. Page 31.
For critical operations, such as live recording or on-air production a dual power supply
system can be specified. This option features two independent PSUs per console section,
each having an independent mains supply input connector.
A 315mm wide Perspex panel which fits over the channel area leaving the faders free. The
tray is fitted with rollers allowing it to be moved sideways across the console.
Duality Fuse Installation & Setup Guide
Section 3
Advertisement
Table of Contents
Need help?
Do you have a question about the Duality Fuse and is the answer not in the manual?
Questions and answers